Back To Top
Valves
We are one of the country's leading valves manufacturer providing the needs of water utility corporations nationwide. Based on a unique functional design, our valves are stress-tested to ensure maximum durability.
Butterfly Valves
Butterfly valves are significant component of any water distribution system or treatment plant operation. Their function is similar situations but would not be used in sewage installations. This valve is now predominantly resilient sealed and hence gives drop tight closure over long periods.
The disc moves through 90 degrees and since shafts operate in self lubricating bearings, the valves can also be used for less onerous flow regulation duties.
Butterfly valves are significant component of any water distribution system or treatment plant operation. Their function is similar situations but would not be used in sewage installations. This valve is now predominantly resilient sealed and hence gives drop tight closure over long periods.
The disc moves through 90 degrees and since shafts operate in self lubricating bearings, the valves can also be used for less onerous flow regulation duties.
Air Release Valve
Air valve play an important part in protecting piplines and providing maximum efficiency. Their duty is to fully and adequately ventilate a pipeline or system. This involves exhalation and inhalation of large volumes of air when filling or emptying or on pump start up or cessation sequences. Valves for this function are the large or double orific etypes. During pressurized conditions, air also accumulates and release is by means of the small orifice or double orifice designs. Valves should be sited at all points along a system where air/gas is likely to accumulate. These points will include all peak points, pressure break points, free surface sections.
Air valve play an important part in protecting piplines and providing maximum efficiency. Their duty is to fully and adequately ventilate a pipeline or system. This involves exhalation and inhalation of large volumes of air when filling or emptying or on pump start up or cessation sequences. Valves for this function are the large or double orific etypes. During pressurized conditions, air also accumulates and release is by means of the small orifice or double orifice designs. Valves should be sited at all points along a system where air/gas is likely to accumulate. These points will include all peak points, pressure break points, free surface sections.Check Valve
Swing check valves are used in horizontal or vertical systems with rising flow to prevent flow reversal. Suitable for single pump water and sewage applications with low high lift, and for multi-pump water applications which have low to medium lift. These valves are on the suction lift side of pumping mains to maintain pumps in a prime condition.
Swing check valves are used in horizontal or vertical systems with rising flow to prevent flow reversal. Suitable for single pump water and sewage applications with low high lift, and for multi-pump water applications which have low to medium lift. These valves are on the suction lift side of pumping mains to maintain pumps in a prime condition.
 |
 |
| Check Valve F/F | Check Valve with Counterweight |
Float Valve 
A pressure operated float valve, normally fitted within a tank or reservoir, which automatically controls the rate of filling and will shut off when a predetermined level is reached. A general purpose valve but particularly suitable for use on the end of pumping means.
A pressure operated float valve, normally fitted within a tank or reservoir, which automatically controls the rate of filling and will shut off when a predetermined level is reached. A general purpose valve but particularly suitable for use on the end of pumping means.
MF Gate Valve Flanged Series 21/00 PN-10 and PN-16
The MF Valve is designed to provide tight shut off and long life sealing in service areas. Treatment plant, pipe testing, fire protection, equipment isolation and general purposes. Valve's function is to isolate or sectionalize any piece of equipment or length of pipeline in water or sewage system. It is normal practice, therefore, to use them on suction and delivery branches of pumps at regular intervals along a pipeline, at branches underneath air valves, ono bypasses, on drains or washouts, etc.
Penstock Gates, on the other hand, isolates or sectionalizes any piece of equipment or length of pipeline in water or sewage system. It is normal practice to use them on suction and delivery branches of pumps at regular intervals along a pipeline, at branches underneath air valves on by passes, on drains or washouts etc.
The MF Valve is designed to provide tight shut off and long life sealing in service areas. Treatment plant, pipe testing, fire protection, equipment isolation and general purposes. Valve's function is to isolate or sectionalize any piece of equipment or length of pipeline in water or sewage system. It is normal practice, therefore, to use them on suction and delivery branches of pumps at regular intervals along a pipeline, at branches underneath air valves, ono bypasses, on drains or washouts, etc.
Penstock Gates, on the other hand, isolates or sectionalizes any piece of equipment or length of pipeline in water or sewage system. It is normal practice to use them on suction and delivery branches of pumps at regular intervals along a pipeline, at branches underneath air valves on by passes, on drains or washouts etc.
 |
 |
 |
 |
| Gate Valve Flange Type | Gate Valve F/F Rising Stem | Sluice Gate | Valve Box |